hdtv antenna consumer reports for Sale – Review & Buy at Cheap Price

Terk Technology HDTVi VHF/UHF HDTV Indoor Antenna for Sale - Review & Buy at Cheap Price

List Price : $49.99

Price : $29.88

Terk Technology HDTVi VHF/UHF HDTV Indoor Antenna Feature | Sale - Review & Buy at Cheap Price

• Optimized to receive all HDTV channels (2 to 69) for free local high-definition entertainment when used with a compatible TV or TV/receiver
• Great for apartments or condos, where roof access is limited
• Small footprint occupies little space; high gain lets you pick up more stations
• Highly directional UHF elements eliminate unwanted reflected signals that interfere with reception
• Measures 13.5 x 42 x 16.5 inches (W x H x D) with dipoles extended

		Brand:	Terk
		List Price:	$49.99
		Our Price:	$29.88
		Total Price:	$29.88
		Usually ships in 24 hours

Terk antennas are designed to deliver sharp, clear, high definition signal reception. At Terk, the engineering department is dedicated to designing antennas that enhance both the latest technology and the aesthetics of any viewing environment. The HDTVi indoor antenna installs in minutes, is easy to use and simple to adjust. Features: Optimized for HDTV reception UHF and VHF elements for reception of all available broadcasts (channels 2-69) Highly directional UHF element reduces signal interference Specifications: VHF channels: 2-13 UHF channels: 14-69 Output impedance: 75 ohms Height with dipoles fully extended: 42" Manual included Warranty: one year parts

Terk Technology HDTVi VHF/UHF HDTV Indoor Antenna Overview | Sale - Review & Buy at Cheap Price

Terk antennas are designed to deliver sharp, clear, high definition signal reception. At Terk, the engineering department is dedicated to designing antennas that enhance both the latest technology and the aesthetics of any viewing environment. The HDTVi indoor antenna installs in minutes, is easy to use and simple to adjust. Features: Optimized for HDTV reception UHF and VHF elements for reception of all available broadcasts (channels 2-69) Highly directional UHF element reduces signal interference Specifications: VHF channels: 2-13 UHF channels: 14-69 Output impedance: 75 ohms Height with dipoles fully extended: 42" Manual included Warranty: one year parts

Terk Technology HDTVi VHF/UHF HDTV Indoor Antenna Specifications | Sale - Review & Buy at Cheap Price

Terk Technology HDTVi VHF/UHF HDTV Indoor Antenna Specification

• Optimized to receive all HDTV channels (2 to 69) for free local high-definition entertainment when used with a compatible TV or TV/receiver
• Great for apartments or condos, where roof access is limited
• Small footprint occupies little space; high gain lets you pick up more stations
• Highly directional UHF elements eliminate unwanted reflected signals that interfere with reception
• Measures 13.5 x 42 x 16.5 inches (W x H x D) with dipoles extended

List Price : $49.99
Our Price : $29.88
You Save : 40% Terk Technology HDTVi VHF/UHF HDTV Indoor Antenna Terk antennas are designed to deliver sharp, clear, high definition signal reception. At Terk, the engineering department is dedicated to designing antennas that enhance both the latest technology and the aesthetics of any viewing environment. The HDTVi indoor antenna installs in minutes, is easy to use and simple to adjust. Features: Optimized for HDTV reception UHF and VHF elements for reception of all available broadcasts (channels 2-69) Highly directional UHF element reduces signal interference Specifications: VHF channels: 2-13 UHF channels: 14-69 Output impedance: 75 ohms Height with dipoles fully extended: 42" Manual included Warranty: one year parts

Reviews More...

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Mar 21, 2012 02:47:09
                                   

Visit : for Sale . 3 day blinds coupon

Axion AXN-8905 9-Inch Widescreen Handheld LCD TV for Sale - Review & Buy at Cheap Price

List Price : $149.99

Axion AXN-8905 9-Inch Widescreen Handheld LCD TV Feature | Sale - Review & Buy at Cheap Price

• 9-Inch widescreen LCD portable handheld TV with built in stand
• Built-in ATSC tuner for digital channels
• Built-in antenna allows for easy repositioning for better reception
• A/V input for external audio/video sources
• Includes AC adaptor, instruction manual, remote control, external antenna, car adaptor and A/V cables

		Brand:	Axion
		List Price:	$149.99
		Our Price:
		Total Price:
		N/A

Product Description The already popular Axion Portable TV now comes in a bigger size, crispier image display--introducing the Axion 9” Portable TV with hi-resolution display. The bigger screen improves your viewing pleasure, and the most important thing is we still maintain its portability. This TV is great for both indoors and outdoors. The built-in rechargeable battery provides adequate power for you to watch a movie or series (approx. 120mins) when fully charged.

Features

• 9-inch Widescreen LCD mobile TV with Hi-Resolution and Hi-Brightness
• Built in ATSC tuner for both Analog & Digital channels
• Brightness adjustable
• A/V Input for external audio/video sources
• Built-in speaker with headphone jack
• Built-in rechargeable Lithium-Polymer battery
• Card style remote control
• Detachable external antenna with big magnet base

Specifications

• Signal system: ATSC
• Panel size: 9 inch
• Resolution: 800 x 480
• Power source: DC 9V
• Operating temperature: 5~35°C
• Weight: 1.7 lbs
• Dimensions (W x D x H): 9.9 X 7.7 X 1.3 inch

Accessories

• AC adaptor
• Instruction manual
• Remote control
• External rod antenna with detachable magnet base
• Car adaptor A/V cable

Powering and Installation

Powering the System Indoors

Plug one end of the AC to DC adapter into the DC Input jack on the right side of the mobile TV , then plug the other end into the 100~240V AC power receptacle.

Note: Use the provided AC to DC adapter or an adapter with proper specifications.

Powering the System with Built-in Battery

A built-in rechargeable battery (Li-Polymer) is included for use. When the built-in battery cannot power the TV or is used for the first time, recharge it.

1. Turn off the TV
2. Connect the AC to DC adapter to the DC jack and a standard wall outlet
3. The red charge indicator will light
4. Once fully recharged, the light will turn off
5. Disconnect the AC to DC adapter after the battery is fully charged

Note: The TV can operate 2 hrs with built-in battery. When the sound level lowers or the picture becomes unstable, charge the battery about 7 hours.

---

Controls, Indicators, and Connectors

Unit View

---

1. IR Sensor:Infrared sensor receives information from remote.
2. POWER on/off button
3. MENU button:Open and close TV menu or pressing and holding it to interrupt the auto scan.
4. Up/Down/Left/Right buttons:Used to navigate on-screen menus.
   
5. CH+/-: Select the previous or next channel.
6. VOL+/-:Increase/decrease the volume.
7. ENTER button:Confirm your selection.
8. INPUT button:Switch between TV and AV IN.
9. WIDE button:Switches the screen between the 16:9 and 4:3 screen displays.
10. RF IN:Connect with antenna.
11. AV IN:Connect with AV device.
12. Headphone jack:Insert headphone (not included) for private listening. It can disable the speakers.
13. Brightness Up/Down Control:Adjust the brightness.
14. POW/CHG LED:Lights green when the TV on and lights red when the built-in battery is charging.
15. DC 9V jack: Connect to the provided AC to DC adapter.

Note:Moving the TV may cause signal loss, especially for digital programs. The TV will shut off automatically if it receives no signal for 15 minutes.

---

Setting the DTV

To Set the DTV

Enter the channel number followed by “-1.” For example, enter “11-1” for the digital channel 11. If available, the digital channel appears. Some digital stations provide multiple broadcasts on a single channel. To access these directly, enter higher numbers after the channel number. Take “11-2” “11-3” for example. If available, these digital channels appear.

Using the External Antenna

When the picture is not clear with the built-in rod antenna, try placing your TV near a window or connecting an external antenna to the TV for improve reception. If you are in a weak TV signal area, or are inside a concrete building, you might need an external antenna to improve reception. Connect the external antenna to the RF IN jack on the right side of the TV. Follow the install steps below:

     Diagram I

Screw the rod antenna loose from the RF IN jack.

     Diagram II

Screw the rod antenna onto the top jack of the magnet pedestal.

     Diagram III

Screw the metal plug of the external antenna onto the RF IN jack on the TV.

     Diagram IV

Place the magnet pedestal vertically; pull the rod antenna to scan channels.

Note: Based on the current ATSC standards, mobile reception of digital stations are practically impossible especially when the TV is moving or on a moving surface or vehicle. Picture on the screen tends to garble up or lose signal indefinitely. To avoid this issue, try not to move the TV around when watching TV programs.

Using Your TV as a Monitor

1. Press INPUT button and select AV IN mode.
2. Connect the AV cable plugs to the out jack of AV Device as below:  

• Yellow plug: Connect to the VIDEO OUT jack on the AV Device.
• Red plug: Connect to the AUDIO IN R jack on the AV Device.
• White plug: Connect to the AUDIO IN L jack on the AV Device.

3. Connect the AV cable’s 1/8-inch plug to the AV IN jack on the TV unit.

Troubleshooting

The player won’t turn on?

• Charge the battery.
• Check the AC to DC adapter is connected.
• Connect to another power outlet.

No TV Program Picture?

• Do a full scan of channels by pressing “Auto” on the remote or in the Menu settings
• Make sure the input selection is set to TV instead of AV
• Position your TV to a better location with the external antenna connected and do a channel rescan.

No sound?

• Increase the volume.
• Press MUTE on the remote control to turn off mute.
• Unplug the headphones.

Poor picture?

• Adjust the telescoping antenna.
• Move to a window (if inside a building structure).
• Use an external antenna (The one provided or regular antenna.)

Remote control doesn’t work?

• Remove any obstacles between the remote and the TV.
• Replace the battery in the remote control.

Axion AXN-8905 9-Inch Widescreen Handheld LCD TV Overview | Sale - Review & Buy at Cheap Price

Product Description The already popular Axion Portable TV now comes in a bigger size, crispier image display--introducing the Axion 9” Portable TV with hi-resolution display. The bigger screen improves your viewing pleasure, and the most important thing is we still maintain its portability. This TV is great for both indoors and outdoors. The built-in rechargeable battery provides adequate power for you to watch a movie or series (approx. 120mins) when fully charged.

Features

• 9-inch Widescreen LCD mobile TV with Hi-Resolution and Hi-Brightness
• Built in ATSC tuner for both Analog & Digital channels
• Brightness adjustable
• A/V Input for external audio/video sources
• Built-in speaker with headphone jack
• Built-in rechargeable Lithium-Polymer battery
• Card style remote control
• Detachable external antenna with big magnet base

Specifications

• Signal system: ATSC
• Panel size: 9 inch
• Resolution: 800 x 480
• Power source: DC 9V
• Operating temperature: 5~35°C
• Weight: 1.7 lbs
• Dimensions (W x D x H): 9.9 X 7.7 X 1.3 inch

Accessories

• AC adaptor
• Instruction manual
• Remote control
• External rod antenna with detachable magnet base
• Car adaptor A/V cable

Powering and Installation

Powering the System Indoors

Plug one end of the AC to DC adapter into the DC Input jack on the right side of the mobile TV , then plug the other end into the 100~240V AC power receptacle.

Note: Use the provided AC to DC adapter or an adapter with proper specifications.

Powering the System with Built-in Battery

A built-in rechargeable battery (Li-Polymer) is included for use. When the built-in battery cannot power the TV or is used for the first time, recharge it.

1. Turn off the TV
2. Connect the AC to DC adapter to the DC jack and a standard wall outlet
3. The red charge indicator will light
4. Once fully recharged, the light will turn off
5. Disconnect the AC to DC adapter after the battery is fully charged

Note: The TV can operate 2 hrs with built-in battery. When the sound level lowers or the picture becomes unstable, charge the battery about 7 hours.

---

Controls, Indicators, and Connectors

Unit View

---

1. IR Sensor:Infrared sensor receives information from remote.
2. POWER on/off button
3. MENU button:Open and close TV menu or pressing and holding it to interrupt the auto scan.
4. Up/Down/Left/Right buttons:Used to navigate on-screen menus.
   
5. CH+/-: Select the previous or next channel.
6. VOL+/-:Increase/decrease the volume.
7. ENTER button:Confirm your selection.
8. INPUT button:Switch between TV and AV IN.
9. WIDE button:Switches the screen between the 16:9 and 4:3 screen displays.
10. RF IN:Connect with antenna.
11. AV IN:Connect with AV device.
12. Headphone jack:Insert headphone (not included) for private listening. It can disable the speakers.
13. Brightness Up/Down Control:Adjust the brightness.
14. POW/CHG LED:Lights green when the TV on and lights red when the built-in battery is charging.
15. DC 9V jack: Connect to the provided AC to DC adapter.

Note:Moving the TV may cause signal loss, especially for digital programs. The TV will shut off automatically if it receives no signal for 15 minutes.

---

Setting the DTV

To Set the DTV

Enter the channel number followed by “-1.” For example, enter “11-1” for the digital channel 11. If available, the digital channel appears. Some digital stations provide multiple broadcasts on a single channel. To access these directly, enter higher numbers after the channel number. Take “11-2” “11-3” for example. If available, these digital channels appear.

Using the External Antenna

When the picture is not clear with the built-in rod antenna, try placing your TV near a window or connecting an external antenna to the TV for improve reception. If you are in a weak TV signal area, or are inside a concrete building, you might need an external antenna to improve reception. Connect the external antenna to the RF IN jack on the right side of the TV. Follow the install steps below:

     Diagram I

Screw the rod antenna loose from the RF IN jack.

     Diagram II

Screw the rod antenna onto the top jack of the magnet pedestal.

     Diagram III

Screw the metal plug of the external antenna onto the RF IN jack on the TV.

     Diagram IV

Place the magnet pedestal vertically; pull the rod antenna to scan channels.

Note: Based on the current ATSC standards, mobile reception of digital stations are practically impossible especially when the TV is moving or on a moving surface or vehicle. Picture on the screen tends to garble up or lose signal indefinitely. To avoid this issue, try not to move the TV around when watching TV programs.

Using Your TV as a Monitor

1. Press INPUT button and select AV IN mode.
2. Connect the AV cable plugs to the out jack of AV Device as below:  

• Yellow plug: Connect to the VIDEO OUT jack on the AV Device.
• Red plug: Connect to the AUDIO IN R jack on the AV Device.
• White plug: Connect to the AUDIO IN L jack on the AV Device.

3. Connect the AV cable’s 1/8-inch plug to the AV IN jack on the TV unit.

Troubleshooting

The player won’t turn on?

• Charge the battery.
• Check the AC to DC adapter is connected.
• Connect to another power outlet.

No TV Program Picture?

• Do a full scan of channels by pressing “Auto” on the remote or in the Menu settings
• Make sure the input selection is set to TV instead of AV
• Position your TV to a better location with the external antenna connected and do a channel rescan.

No sound?

• Increase the volume.
• Press MUTE on the remote control to turn off mute.
• Unplug the headphones.

Poor picture?

• Adjust the telescoping antenna.
• Move to a window (if inside a building structure).
• Use an external antenna (The one provided or regular antenna.)

Remote control doesn’t work?

• Remove any obstacles between the remote and the TV.
• Replace the battery in the remote control.

Axion AXN-8905 9-Inch Widescreen Handheld LCD TV Specifications | Sale - Review & Buy at Cheap Price

Axion AXN-8905 9-Inch Widescreen Handheld LCD TV Features

• 9-Inch widescreen LCD portable handheld TV with built in stand
• Built-in ATSC tuner for digital channels
• Built-in antenna allows for easy repositioning for better reception
• A/V input for external audio/video sources
• Includes AC adaptor, instruction manual, remote control, external antenna, car adaptor and A/V cables

Our Price : $149.99 Axion AXN-8905 9-Inch Widescreen Handheld LCD TV Product Description The already popular Axion Portable TV now comes in a bigger size, crispier image display--introducing the Axion 9” Portable TV with hi-resolution display. The bigger screen improves your viewing pleasure, and the most important thing is we still maintain its portability. This TV is great for both indoors and outdoors. The built-in rechargeable battery provides adequate power for you to watch a movie or series (approx. 120mins) when fully charged.

Features

• 9-inch Widescreen LCD mobile TV with Hi-Resolution and Hi-Brightness
• Built in ATSC tuner for both Analog & Digital channels
• Brightness adjustable
• A/V Input for external audio/video sources
• Built-in speaker with headphone jack
• Built-in rechargeable Lithium-Polymer battery
• Card style remote control
• Detachable external antenna with big magnet base

Specifications

• Signal system: ATSC
• Panel size: 9 inch
• Resolution: 800 x 480
• Power source: DC 9V
• Operating temperature: 5~35°C
• Weight: 1.7 lbs
• Dimensions (W x D x H): 9.9 X 7.7 X 1.3 inch

Accessories

• AC adaptor
• Instruction manual
• Remote control
• External rod antenna with detachable magnet base
• Car adaptor A/V cable

Powering and Installation

Powering the System Indoors

Plug one end of the AC to DC adapter into the DC Input jack on the right side of the mobile TV , then plug the other end into the 100~240V AC power receptacle.

Note: Use the provided AC to DC adapter or an adapter with proper specifications.

Powering the System with Built-in Battery

A built-in rechargeable battery (Li-Polymer) is included for use. When the built-in battery cannot power the TV or is used for the first time, recharge it.

1. Turn off the TV
2. Connect the AC to DC adapter to the DC jack and a standard wall outlet
3. The red charge indicator will light
4. Once fully recharged, the light will turn off
5. Disconnect the AC to DC adapter after the battery is fully charged

Note: The TV can operate 2 hrs with built-in battery. When the sound level lowers or the picture becomes unstable, charge the battery about 7 hours.

---

Controls, Indicators, and Connectors

Unit View

---

1. IR Sensor:Infrared sensor receives information from remote.
2. POWER on/off button
3. MENU button:Open and close TV menu or pressing and holding it to interrupt the auto scan.
4. Up/Down/Left/Right buttons:Used to navigate on-screen menus.
   
5. CH+/-: Select the previous or next channel.
6. VOL+/-:Increase/decrease the volume.
7. ENTER button:Confirm your selection.
8. INPUT button:Switch between TV and AV IN.
9. WIDE button:Switches the screen between the 16:9 and 4:3 screen displays.
10. RF IN:Connect with antenna.
11. AV IN:Connect with AV device.
12. Headphone jack:Insert headphone (not included) for private listening. It can disable the speakers.
13. Brightness Up/Down Control:Adjust the brightness.
14. POW/CHG LED:Lights green when the TV on and lights red when the built-in battery is charging.
15. DC 9V jack: Connect to the provided AC to DC adapter.

Note:Moving the TV may cause signal loss, especially for digital programs. The TV will shut off automatically if it receives no signal for 15 minutes.

---

Setting the DTV

To Set the DTV

Enter the channel number followed by “-1.” For example, enter “11-1” for the digital channel 11. If available, the digital channel appears. Some digital stations provide multiple broadcasts on a single channel. To access these directly, enter higher numbers after the channel number. Take “11-2” “11-3” for example. If available, these digital channels appear.

Using the External Antenna

When the picture is not clear with the built-in rod antenna, try placing your TV near a window or connecting an external antenna to the TV for improve reception. If you are in a weak TV signal area, or are inside a concrete building, you might need an external antenna to improve reception. Connect the external antenna to the RF IN jack on the right side of the TV. Follow the install steps below:

     Diagram I

Screw the rod antenna loose from the RF IN jack.

     Diagram II

Screw the rod antenna onto the top jack of the magnet pedestal.

     Diagram III

Screw the metal plug of the external antenna onto the RF IN jack on the TV.

     Diagram IV

Place the magnet pedestal vertically; pull the rod antenna to scan channels.

Note: Based on the current ATSC standards, mobile reception of digital stations are practically impossible especially when the TV is moving or on a moving surface or vehicle. Picture on the screen tends to garble up or lose signal indefinitely. To avoid this issue, try not to move the TV around when watching TV programs.

Using Your TV as a Monitor

1. Press INPUT button and select AV IN mode.
2. Connect the AV cable plugs to the out jack of AV Device as below:  

• Yellow plug: Connect to the VIDEO OUT jack on the AV Device.
• Red plug: Connect to the AUDIO IN R jack on the AV Device.
• White plug: Connect to the AUDIO IN L jack on the AV Device.

3. Connect the AV cable’s 1/8-inch plug to the AV IN jack on the TV unit.

Troubleshooting

The player won’t turn on?

• Charge the battery.
• Check the AC to DC adapter is connected.
• Connect to another power outlet.

No TV Program Picture?

• Do a full scan of channels by pressing “Auto” on the remote or in the Menu settings
• Make sure the input selection is set to TV instead of AV
• Position your TV to a better location with the external antenna connected and do a channel rescan.

No sound?

• Increase the volume.
• Press MUTE on the remote control to turn off mute.
• Unplug the headphones.

Poor picture?

• Adjust the telescoping antenna.
• Move to a window (if inside a building structure).
• Use an external antenna (The one provided or regular antenna.)

Remote control doesn’t work?

• Remove any obstacles between the remote and the TV.
• Replace the battery in the remote control.

Reviews More...

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Jan 07, 2012 06:25:18
                                   

My Links : for Sale . bedskirt queen white

AOC LC32W063 32-Inch LCD HDTV, Glossy for Sale - Review & Buy at Cheap Price

List Price : $369.99

AOC LC32W063 32-Inch LCD HDTV, Glossy Feature | Sale - Review & Buy at Cheap Price

• 1366x768 Resolution
• ATSC with Clear QAM & NTSC Tuner
• 3x HDMI, Video, Component, PC Input
• High Contrast Ratio 25,000:1
• USB 2.0 (photo viewer)

		Brand:	AOC
		List Price:	$369.99
		Our Price:
		Total Price:
		N/A

AOC 32"w LCD HDTV with Digital ATSC clear QAM tuner built-in, HDMI & PC Input as well as a Photo viewer with USB 2.0 plug and play. The model builds from our last model by offering and improved design and great picture and sound quality, with crystal clear high definition performance with a 25,000:1 dynamic contrast ratio. The 32" is great for those who are looking for the best in value and performance. With inputs such as HDMI (3) for the best connectivity and NTSC(National Television System Committee) is the analog television system used in the United States, Canada, Japan, Mexico, the Philippines, South Korea, Taiwan, and some other countries./ATSC tuners with Clear QAMQuadrature amplitude modulation (QAM) is a modulation scheme which conveys data by changing (modulating) the amplitude of two carrier waves. These two waves, usually sinusoids, are out of phase with each other by 90 and are thus called quadrature carriers,hence the name of the scheme.

AOC LC32W063 32-Inch LCD HDTV, Glossy Overview | Sale - Review & Buy at Cheap Price

AOC 32"w LCD HDTV with Digital ATSC clear QAM tuner built-in, HDMI & PC Input as well as a Photo viewer with USB 2.0 plug and play. The model builds from our last model by offering and improved design and great picture and sound quality, with crystal clear high definition performance with a 25,000:1 dynamic contrast ratio. The 32" is great for those who are looking for the best in value and performance. With inputs such as HDMI (3) for the best connectivity and NTSC(National Television System Committee) is the analog television system used in the United States, Canada, Japan, Mexico, the Philippines, South Korea, Taiwan, and some other countries./ATSC tuners with Clear QAMQuadrature amplitude modulation (QAM) is a modulation scheme which conveys data by changing (modulating) the amplitude of two carrier waves. These two waves, usually sinusoids, are out of phase with each other by 90 and are thus called quadrature carriers,hence the name of the scheme.

AOC LC32W063 32-Inch LCD HDTV, Glossy Specifications | Sale - Review & Buy at Cheap Price

AOC LC32W063 32-Inch LCD HDTV, Glossy Specification

• 1366x768 Resolution
• ATSC with Clear QAM & NTSC Tuner
• 3x HDMI, Video, Component, PC Input
• High Contrast Ratio 25,000:1
• USB 2.0 (photo viewer)

Our Price : $369.99 AOC LC32W063 32-Inch LCD HDTV, Glossy AOC 32"w LCD HDTV with Digital ATSC clear QAM tuner built-in, HDMI & PC Input as well as a Photo viewer with USB 2.0 plug and play. The model builds from our last model by offering and improved design and great picture and sound quality, with crystal clear high definition performance with a 25,000:1 dynamic contrast ratio. The 32" is great for those who are looking for the best in value and performance. With inputs such as HDMI (3) for the best connectivity and NTSC(National Television System Committee) is the analog television system used in the United States, Canada, Japan, Mexico, the Philippines, South Korea, Taiwan, and some other countries./ATSC tuners with Clear QAMQuadrature amplitude modulation (QAM) is a modulation scheme which conveys data by changing (modulating) the amplitude of two carrier waves. These two waves, usually sinusoids, are out of phase with each other by 90 and are thus called quadrature carriers,hence the name of the scheme.

Reviews More...

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Nov 15, 2011 06:25:16
                                   

Tags : for Sale . . generators rent seiko watches jakarta